Maintenance and troubleshooting
20.08.2012 Page 36 of 42 Rev. 04
6 Maintenance and troubleshooting
6.1 Introduction
This chapter tells you what you need to know about maintenance of the SUPER
GL easy / easy+ and about faults which can occur and whether and how you can
remedy these yourself.
If you are unsure about some of the items or options, DO NOT UNDER ANY
CIRCUMSTANCES try any options you think might help without technical aid. DO
NOT UNDER ANY CIRCUMSTANCES open the analyser without an authorised
service technician. Our service hotline is available by telephone free of charge.
6.2 Maintenance
The SUPER GL easy / easy+ needs servicing once a year by specialist staff
assigned and authorised by the manufacturer. A warning will appear on the
display once the service interval has elapsed.
If the service is not carried out, this can lead to incorrect readings which are not
the responsibility of the manufacturer.
Please contact the manufacturer or your sales partner to have this service
carried out.
6.3 Servicing
The following operations can and should be carried out by the user.
These operations help with the careful treatment and care of the analyser and to
ensure its longest possible lifespan. This is NOT servicing and repair work, for
which only authorised servicing engineers
are responsible.
6.3.1 Cleaning and disinfection
Please note the valid regulations in your laboratory for cleaning and disinfection
of the analyser. For disinfection, all the accessible surfaces of the analyser
should be wiped with a cloth moistened with disinfectant. Use a disinfectant for
surface disinfection. Note the manufacturer’s instructions on disinfectant.
To Next Page
Loading...