Maintenance and troubleshooting
20.08.2012 Page 38 of 42 Rev. 04
To avoid disruption in the work process of the analyser and soiling, we
recommend changing the containerkit only when the operating status is “Stand
by” and when there is an inbuilt rinse vessel and sample canula. Changing the
containerkit should be carried out quickly, as liquid is expelled during the rinse
processes carried out from time to time.
Never refill the containerkit!!
Fig. 6.3 Containerkit
The majority of germs which occur in human samples are
killed by the composition of the system solution and the
high dilution of human samples. Nevertheless, the waste
must be regarded as potentially infectious so follow the
relevant regulations for disposal.
6.3.4 Exchange of pump head
In some situations it is necessary to exchange the pump head, e.g. if device
should get service.
For changing the pump head proceed as following steps:
1
2
Abb. 6.4 View of pump head Abb. 6.5 Pump head
To Next Page
Loading...