Description of the analyser
20.08.2012 Page 17 of 42 Rev. 04
3.6 Consumables
The following consumable materials are required for operating the analyser.
- Prefilled reaction cups without capillary tubes or with end-to-end capillary
tubes or with open-end capillary tubes for taking samples
- Calibration solution
- Containerkit for haemolysis system solution and waste
- Glucose sensor or glucose/lactate sensor
- Control materials
Please find the details for using these consumable materials in the operating
chapter of these instructions for use or in the relevant packaging inserts.
To Next Page
Loading...