NM2C SOFTWARE UPDATE PROCEDURE (continued)
7.6 SST Operation
The SST Main Menu shown in Figure 7-3 appears on the remote display (or
external PC).
MACHINE ID: NM2C
SERIAL NUMBER: 00011066
Serial Port Configuration
Set Time and Date
Display UUT Configuration
Save/Restore Settings
Enter Primary Service
Exit SST
SV50101
SOFTWARE VERSION: 1.20
SYSTEM FEATURES: 0003
Figure 7-3: SST MAIN MENU
In the upper left corner of the screen, MACHINE ID indicates the Narkomed
2C is under test (NM2C), and the SERIAL NUMBER of the machine is
displayed.
The service functions that are available through the SST main menu are
described on the following pages.
To terminate the SST program, move the cursor to EXIT SST with the down
arrow key and press ENTER.
Rev. G
7-7
RETURN TO CD-ROM TABLE OF CONTENTS
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
To Next Page
Loading...
