5-24
Overview
Section C
Monitor Same Circuit
Overview
Introduction
Menu options for monitoring become available only after setting up the instrument or
from reading a setup template from the data card. Users can monitor the same circuit,
and configure combinations of setups unique to their task applications.
Monitoring
options
Users have the option to begin monitoring immediately or at a specified time and date.
The Monitoring Menu also allows users to do Advanced setups via the Modify Trigger
Parameters and Intervals option. Unlike the Automatic and Wizard setup procedures,
Advanced setup allows users to change parameters and enter new limits to capture
events. A full discussion on modifying threshold settings is found in Chapter 6
Advanced Setup Options.
In this section
The following topics are covered in this section.
Topic See Page
Turning Monitoring On/Off 5-25
Monitoring at a Specified Time and Date 5-28
Modify Trigger Parameters and Intervals 5-32
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
Need help?
General
