3-3
CH 3/ View Real Time Data
Turning Channels On/Off
Select channels
to display
From the Scope mode screen, press Chan to turn Volts/Amps channel selection on/off.
Any of the following will turn channels on/off:
• Press the desired Volts/Amps channel to turn it on/off.
• Press Volts or Amps button to turn on/off all channels of that parameter.
• Press A, B, C, D to turn on/off both the Volts and Amps for that channel.
Press OK to accept channel selection.
MARK202
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
