1-3
CH 1/ Getting Started
Unpacking the 4400
Introduction
For maximum protection against possible shipping damage, the 4400 has been sealed in
a two-piece, plastic suspension pack, enclosed within a durable shipping carton. After
opening the carton, inspect the contents for possible shipping damage and check the
carton inventory.
Unpacking
Unpack the 4400 from the carton as follows:
Shipping
damage
inspection
Visually inspect the 4400 for possible shipping damage. If any damage exists, first
notify and file an insurance claim with your carrier or underwriter or both. Then notify
Dranetz
Customer Service Department of your intentions to return the unit. DO
NOT return the 4400 without prior instructions from Dranet
z Customer Service
Department. Dranetz
Customer Service Department can be reached at (732) 287-
3680 or 1-800-372-6832.
Repacking for
return shipment
If the unit must be returned to Dranetz
for service or repair, wrap the unit securely
in heavy packaging material and place in a well padded box or crate to prevent damage.
Do not return the 4400 in an unpacked box. Dranetz
will not be responsible for
damage incurred during transit due to inadequate packing on your part.
Return notice
Notify Dranetz
Customer Service of your intention of returning the unit. Do not
return the unit without prior instructions from Dranetz
. Dranetz Customer
Service Department can be reached at (732) 287-3680 or 1-800-372-6832.
Step Action
1 Remove any remaining literature inside the top of the carton.
2 Carefully remove the 4400 from its shipping carton.
3 Remove all accessories inside the carton. Check that all of the standard
accessories (see page 1-4) are included.
w ww . . co m
information@itm.com1.800.561.8187