Vigor2960 Series User’s Guide
106
server and access into Internet.
User Authentication
Type
Users in LAN can access into Internet through Vigor router
with RADIUS, LDAP or local authentication. Specify the
type for the users.
LDAP profiles
It is available when LDAP is selected as User
Authentication Type.
If you choose LDAP as the authentication type, use the drop
down list to specify the LDAP profile.
DHCP From
It is available when RADIUS is selected as User
Authentication Type.
DHCP Relay
Enable - If you want to use another DHCP server in the
network other than the Vigor Router’s, you can let Relay
Agent help you to redirect the DHCP request to the specified
location.
DHCP Server Location – Choose one of the interfaces for
DHCP server.
DHCP Server IP Address - Set the IP address of the DHCP
server you are going to use so DHCP Relay can help to
forward the DHCP request to the DHCP server.
Apply
Click it to save and exit the dialog.
Cancel
Click it to discard current page modification.
To Next Page
Loading...
Need help?
General
