Vigor2960 Series User’s Guide
308
VPN Settings Via
Select From Current Settings - Current VPN LAN to LAN
profiles will be listed below such setting. Choose the one
you need.
Create New VPN Profile – It allows you to create a new
VPN LAN to LAN profile. Simply type the name in the field
of Profile Name. The field of Profile Name is available only
when you click this setting.
Profile Name
Type a new name for such profile.
Next
Go to next page.
Cancel
Cancel the configuration and return to the home page of such
function.
3. Click Create New VPN Profile and type the name of the profile. Click Next to get into
next page. Note that if you choose PPTP as the Type in Step 2, you will see the page
as below:
Item Description
Profile
Display the name of the profile.
Enable
Check this box to enable such profile.
PPTP User Name
Choose a user for authentication in PPTP connection.
Such profile shall be created in User Management>>User
Profile previously. Otherwise, there are no selections
displayed here.
Local IP / Subnet
Mask
Type the IP address and subnet mask of local host.
Remote IP / Subnet
Mask
Type the LAN IP address and LAN subnet mask for the
remote host.
To Next Page
Loading...
Need help?
General
