Vigor2960 Series User’s Guide
403
HTTPS Allow
Click Enable to allow system administrator to login from the
HTTPS server and management the web page of the router.
FTP Allow
Click Enable to allow system administrator to login from the
FTP server and management the web page of the router.
Server Certificate
Use the default setting.
Access List
Click Enable to allow system administrator to login from the
user defined IP address and management the web page of the
router. If you enable such function, the system can be
managed by these three IP addresses via WAN.
IP List
Type the first IP address for the system administrator to
login.
The former boxes indicate the IP address allowed to login to
the router, and the later box indicates a subnet mask allowed
to login to the router.
Allow Ping from WAN
Click Enable to allow system administrator to ping the router
from WAN interface.
LAN Access Control
Allow management from
LAN
Click Enable to control such router from LAN.
Apply to LAN Subnet
Choose the LAN profile(s) that the IPs controlled under such
profile are allowed to access into the web user interface of
Vigor2960.
Web Allow
Click Enable to allow system administrator to login from the
Internet and management the web page of the router.
Telnet Allow
Click Enable to allow system administrator to login from the
telnet and management the web page of the router.
SSH Allow
Click Enable to allow system administrator to login from the
SSH server and management the web page of the router.
HTTPS Allow
Click Enable to allow system administrator to login from the
HTTPS server and management the web page of the router.
FTP Allow
Click Enable to allow system administrator to login from the
FTP server and management the web page of the router.
Allow Ping form LAN
Click Enable to allow system administrator to ping the router
from LAN interface.
Management Port Setup
Web Port
Type the port number for the management through web
page.
Telnet Port
Type the port number for the management through telnet
page.
SSH Port
Type the port number for the management through SSH
server.
HTTPS Port
Type the port number for the management through HTTPS
server.