DREMEL 3D40 IDEA BUILDER
FIRMWARE VERSION:
USAGE COUNTER:
PRINTER STATUS:
MAC:
BACK
HOME
ABOUT
version, usage counter, printer status, and MAC
address.
TOUCH SCREEN ICONS
Indicates that Ethernet is connected.
Indicates that the extruder is cool.
Indicates that the extruder is hot.
INITIAL SETUP
1.
on the initial setup screen. If you decline this setup
you can always setup network later.
2.
connect to your ethernet or search for available
wireless networks.
3. Choose your wireless network using the
touchscreen. Use the arrows to scroll through the
list of available wireless networks. When your
4. Enter your wireless network password and tap
538
To Next Page
Loading...
Need help?
General
