EXT 1824G User’s Manual 4. Detector Component
EXT 1824G-UM-COM-EN-03 38
The READY lamp color is changed from
orange to green when the detector and ECail1
change to exposure ready status.
• Arrange the object in the correct posture and position the detector aligning it with the target part.
• Position the X-ray generator to adjust the exposure field.
• Check all conditions before exposure.
Make sure that Ready lamp is lit and AP lamp is blinking. This means that the system is ready to start an
examination.
When the READY lamp (orange color) lights on, the detector is in detector selection status (Sleep).
The detector enters the detector selection status automatically when it has not been used for a certain
period of time.
To Next Page
Loading...
