DSC PC1832 - Finalizing GT+ Communicator Setup; System Naming and Personalization; System Transfer and Testing

iii
[501]-[514] - Programmable Output Attributes . . . . . . 45
Assigning Partitions to Programmable Outputs . . . . . 45
[551]-[564] - PGM Partition Assignment. . . . . . . . . . . 46
5.8 International Programming . . . . . . . . . . . . . . . . . . . . 46
[700] - Automatic Clock Adjust . . . . . . . . . . . . . . . . . . 46
[701] - First International Option Codes . . . . . . . . . . . 47
[702] - Second International Option Codes . . . . . . . . 47
[703] - Delay Between Dialing Attempts. . . . . . . . . . . 48
5.9 Module Programming . . . . . . . . . . . . . . . . . . . . . . . . 48
5.10 Special Installer Instructions . . . . . . . . . . . . . . . . . . . 48
[900] - Panel Version . . . . . . . . . . . . . . . . . . . . . . . . . 48
[901] - Installer Walk Test Mode Enable / Disable . . . 48
[902] - Reset Module Supervision . . . . . . . . . . . . . . . 48
[903] - Module Supervision Field . . . . . . . . . . . . . . . . 48
[904] - Module Placement Test . . . . . . . . . . . . . . . . . 48
[906] - For Future Use . . . . . . . . . . . . . . . . . . . . . . . . 49
[989][Installer Code] - Default Master Code . . . . . . . . 49
[990][Installer Code] - Installer Lockout Enable . . . . . 49
[991][Installer Code] - Installer Lockout Disable. . . . . 49
[993]-[999] - Factory Defaults. . . . . . . . . . . . . . . . . . . 49
[993][Installer Code] - Restore Alternate Comm. Factory
Default Programming . . . . . . . . . . . . . . . . . . . . . . . . . 49
[995][Installer Code] - Restore ESCORT5580(TC) Factory
Default Programming . . . . . . . . . . . . . . . . . . . . . . . . . 49
[996][Installer Code] - Restore PC5132 Wireless Factory
Default Programming . . . . . . . . . . . . . . . . . . . . . . . . . 49
[997][Installer Code] - Restore PC5400 Factory Default
Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
[998][Installer Code] - Restore PC59XX Factory Default
Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
[999][Installer Code] - Restore Factory Default Program-
ming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Section 6: Fire Monitoring 50
6.1 Fire Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Standard Fire Operation . . . . . . . . . . . . . . . . . . . . . . 50
Auto Verify Fire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Four-Wire Smoke Detector Zones. . . . . . . . . . . . . . . 50
Two-Wire Smoke Detector Zones . . . . . . . . . . . . . . . 50
Fire Supervisory Zone . . . . . . . . . . . . . . . . . . . . . . . . 50
6.2 Fire System Operation . . . . . . . . . . . . . . . . . . . . . . . .50
Manual Signal Silence (Residential use only) . . . . . . 50
Automatic Signal Silence/Bell Time-out (Residential use
only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Manual Sensor Reset ([*][7][2]) (Residential use only) 51
Subsequent Alarm Operation (Residential use only) 51
Auto-Scroll LCD Keypad Display. . . . . . . . . . . . . . . . 51
Fire Trouble Conditions . . . . . . . . . . . . . . . . . . . . . . . 51
AC Delays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Fire Reporting Codes . . . . . . . . . . . . . . . . . . . . . . . . 51
Section 7: Listing Requirements 53
7.1 UL Listed Commercial and Residential Installations .53
Appendix A: Reporting Codes . . . . . . . . . . . . . . . . . . . . . .56
Contact ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
SIA Format - Level 2 (Hardcoded). . . . . . . . . . . . . . . 56
Contact ID Zone Alarm/Restoral Event Codes . . . . . 57
SIA Format Automatic Zone Alarm/Restoral Codes . 57
Appendix B: Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . .58
B.1 PC1616/PC1832/PC1864 UL/ULC Wiring Diagram . . . . .58
B.2 PC1616/PC1832/PC1864 Standard Wiring Diagram . . . .59
B.3 PC1616/PC1832/PC1864 European Wiring Diagram . . . .60
B.4 PC1616/PC1832/PC1864 and PC5700 Fire Module Communi-
cations Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
B.5 Sensor Reset for 2-Wire Smoke Detectors . . . . . . . . . . . .64
B.6 Sensor Reset for 4-wire Smoke Detectors . . . . . . . . . . . .64
B.7 Other PGM Connections . . . . . . . . . . . . . . . . . . . . . . . . .64
The below symbols are used to indicate features that are only available in a particular market. No symbol indicates the feature
is available for all markets.
Europe Italy United States United Kingdom Scandinavia France Canada
EN
IMQ
CP- 01
UK
C
FRA
CAN