PowerSeries - PC1616/PC1832/PC1864
34
[017] Fifth System Options
[018] Sixth System Options
[019] Seventh System Options
Keypad Zone Assignments
[020] Keypad Zone Assignments
Only one keypad may be assigned to a zone.
Default
00 I________I_______I Keypad (slot 1) Zone
00
I________I_______I Keypad (slot 2) Zone
00
I________I_______I Keypad (slot 3) Zone
00
I________I_______I Keypad (slot 4) Zone
00
I________I_______I Keypad (slot 5) Zone
00 I________I_______I Keypad (slot 6) Zone
00
I________I_______I Keypad (slot 7) Zone
00
I________I_______I Keypad (slot 8) Zone
Opt Def ON OFF
1
WLS Key Does Not use Access Codes
WLS Key Uses Access Codes
2
RF Jam Log after 5 Minutes
RF Jam Log after 30 Seconds
3
Audible RF Jam Trouble Beeps
Silent RF Jam Trouble Beeps
4
Double Hit Enabled
Double Hit Disabled
5
Late to Close Enabled
Late to Close Disabled
6
Daylight Saving Time Enabled
Daylight Saving Time Disabled
7
For Future Use
8
Squawk on Away Key Arming/Disarming Only
Squawk on all Arming/Disarming
Opt Def ON OFF
1
Test Transmission Exception Enabled
Test Transmission Exception Disabled
2
For Future Use
3
For Future Use
4
For Future Use
5
Keypad Buzzer Follows Bell Enabled
Keypad Buzzer Follows Bell Disabled
6
Cross Zoning Enabled
Police Code Enabled
7
Exit Delay Restart Enabled (Enabled for SIA CP-01)
Exit Delay Restart Disabled
8
AC Trouble Beeps Enabled
AC Trouble Beeps Disabled
Opt Def ON OFF
1
For Future Use
2
For Future Use
3
First Zone in Alarm Enabled
First Zone in Alarm Disabled
4
For Future Use
5
For Future Use
6
Green Keypad LED Power Indication
Ready Indication
7
[][6] Accessible by All Users
Master Code Only
8
For Future Use
Only one keypad may be
assigned to a slot. Only one
zone can be assigned to a
keypad. Valid entries are
from 01 to 64.
To Next Page
Loading...
Need help?
General
