DSC T-LINK TL250 - Page 14

10
SIA
DVACS Alarms Examples
Example 1 (DVACS with receiver set as 1 digit line number)
Printer:
Computer:
Example 2 (DVACS with receiver set as 3 digits line number)
Printer:
Computer:
Additional Events:
If the T-Link TL250 transmitter does not receive polls (response) from the panel, the T-Link will gener-
ate the events previously generated by the SG-DVL2A for DVACS panel and restoral.
SIA
Printer:
Computer:
Printer:
Computer:
Standard
Printer:
Computer:
Printer:
Computer:
NOTE: The SG-DRL3-IP will use 10-digit account identifications in it's IP table for DVACS
transmitters. The first four digits represents the receiver and line number originally used on
the SG-DVL2A and are programmed as the first four digits of the T-Link account (refer to
appendix F of SG-DRL3-IP Installation Manual).
NOTE:If the automation protocol in the form of 1RRL, 3RRL is required when using the DRL3-
IP in the DVACS configuration, set DRL3-IP Option [11] =1 and CPM3 Options [10] & [11] = 03
01 Nov 2004-13:50:51-01/02-SG -01-1-0456--Fire Alm Zn999
3011 0456FA 999
01 Nov 2004-13:51:03-01/02-SG -01-001-0456--Medical Alm Zn001
3011 0456MA 001
01 Nov 2004-13:50:51-01/02-SG -01-1-001--Account Absent
3011 0001YC 000
01 Nov 2004-13:50:51-01/02-SG -01-1-001--Account Present
3011 0001YK 000
01 Nov 2004-13:50:51-01/02-SG -01-1-001--IDcde IncResp
1011 001 A 0A
01 Nov 2004-13:50:51-01/02-SG -01-1-001--IDcde Restore
1011 001 R 0A