IMPORTANT SAFETY INFORMATION
Fire prevention:
Never locate the fixture on any flammable surface.
Minimum distance from flammable materials: 10 cm
Replace any blown or damaged fuses only with those of identical value
Prevention from electric shock:
High voltage is present inside the unit.
Unplug the unit prior to performing any operation which involves touching the inside of the unit.
This equipment must be grounded, do not connect to non-grounded supplies.
Use only AC supplies 90-260V, 50-60Hz
The unit should never be located in position exposed to rain or in areas of extreme humidity.
A good air ventilation is essential for proper equipment work.
Safety:
The external surface of the unit may exceed 50°C; never handle the unit until at least 5 minutes
have elapsed since the unit was turned off.
Never install the unit in an enclosed area lacking sufficient air flow.
The ambient temperature should not exceed 40°C and should not be lower than -10°C
UNIT DIMENSION
The use of a thermal magnetic circuit breaker is recommended for each Z8.
Unit Dimensions
(LxDxH)
480 x 385 x 88 mm
Weight
7,5 Kg
Packing Dimensions
(LxDxH)
490 x 390 x 90 mm
Weight
8,5 Kg
4
0 m8
m
432 mm
88
mm
8
3 5 mm
Z8 LED Controller
5
To Next Page
Loading...
Need help?
General
