Setting the unit of measurement: Speed
This function allows changing the unit of
measurement of Vehicle speed, Odometer, Trip 1,
Trip 2 and Trip Fuel (when active). To enter this
function gain access to the SETTING MENU, and
keys (1) and (2) to select the UNITS indication, then
press button (4). Select SPEED option, by pressing
button (1) or (2).
Once SPEED function is highlighted, press CONFIRM
MENU button (4). When entering the function, units
of measurement (mph, km/h) are indicated: current
unit of measurement is flashing while the other
available unit is not flashing. Press buttons (1) and (2)
to highlight the units of measurement one by one: in
particular, use button (1) to highlight the following
item and button (2) to highlight the previous item.
Select the required unit of measurement and then
press the CONFIRM MENU button (4): the selected
unit is stored in the instrument panel and the SPEED
option is flashing again.
Press button (2) to make the EXIT box flash; press
button (4) to quit and go back to the previous window.
- Km/h: if this unit is set, the following values will
have the same units of measurement:
1) TOT, TRIP 1, TRIP 2, TRIP FUEL: km
2) Vehicle speed: km/h
- mph: if this unit is set, the following values will
have the same units of measurement:
1) TOT, TRIP 1, TRIP 2, TRIP FUEL: miles
2) Vehicle speed: mph
98
To Next Page
Loading...
Need help?
General
