Ducati Scrambler Owner's Manual

Pin Code
This function allows enabling and then modifying a 4-
digit PIN code to "temporarily" start the vehicle in case
of Immobilizer system malfunction.
The PIN CODE is initially not present in the vehicle, it
must be activated by the user by entering his/her 4-
digit PIN in the instrument panel, otherwise the
vehicle cannot be started temporarily in the case of a
malfunction. To activate this function, refer to
"Entering the PIN CODE" procedure.
To change the PIN refer to "Changing the PIN CODE"
procedure.
In order to temporarily start the vehicle in case of
malfunction of the Immobilizer system, please refer
to the "Vehicle Release" procedure.
Attention
The motorcycle owner must activate (store) the
PIN code; if there is already a stored PIN, contact an
Authorised Ducati Dealer to have the function "reset".
To perform this procedure, the Authorised Ducati
Dealer may ask you to demonstrate that you are the
owner of the motorcycle.
87

Ducati Scrambler Specifications

General

Power	73 hp (54 kW) @ 8, 250 rpm
Transmission	6-speed
Frame	Tubular steel trellis frame
Torque	49 lb-ft (67 Nm) @ 5, 750 rpm
Front Suspension	USD Kayaba 41 mm fork
Rear Suspension	Kayaba rear shock, preload adjustable
Rear Brake	245 mm disc, single-piston caliper
Fuel Tank Capacity	13.5 l (3.6 US gal)
Front Brake	330mm disc, radial 4-piston caliper, ABS