Ducati Scrambler Owner's Manual

Light control
Low / High beam
This function allows you to reduce current
consumption from the battery, by managing
headlight switching-on and off.
Upon Key-On, low and high beams remain off (OFF).
By starting the engine, the low beam will be
automatically activated; from now on, the "standard"
operation will become active, i.e. it will be possible to
switch from low to high beam by pressing button (3)
in position (V) or use the "FLASH" function by pressing
button (3) in position (O). If engine is not started upon
key-on, it is anyway possible to switch the lights on
by pushing the button on the LH high/low beam
switch: button (3) in position (V).
3
O
V
Fig 57
103

Ducati Scrambler Specifications

General

Power	73 hp (54 kW) @ 8, 250 rpm
Transmission	6-speed
Frame	Tubular steel trellis frame
Torque	49 lb-ft (67 Nm) @ 5, 750 rpm
Front Suspension	USD Kayaba 41 mm fork
Rear Suspension	Kayaba rear shock, preload adjustable
Rear Brake	245 mm disc, single-piston caliper
Fuel Tank Capacity	13.5 l (3.6 US gal)
Front Brake	330mm disc, radial 4-piston caliper, ABS