Setting the unit of measurement: Temperature
This function allows you to change the units of
measurement of the Air Temperature indications.
To enter this function gain access to the SETTING
MENU, and keys (1) and (2) to select the UNITS
indication, then press button (4).
Select TEMP option, by pressing button (1) or (2).
Once TEMP. function is highlighted, press CONFIRM
MENU button (4).
When entering the function, units of measurement
(°C, °F) are indicated: unit of measurement is flashing
while the other available unit is not flashing.
Press buttons (1) and (2) to highlight the units of
measurement one by one: in particular, use button (1)
to highlight the following item and button (2) to
highlight the previous item. Select the required unit
of measurement and then press the CONFIRM
MENU button (4): the selected unit is stored in the
instrument panel and the "TEMP." option is flashing
again.
Press button (2) to make the EXIT box flash; press
button (4) to quit and go back to the previous window.
- °C: if this unit is set, the following values will have
the same units of measurement:
1) T – AIR : °C
- °F: if this unit is set, the following values will have
the same units of measurement:
1) T – AIR : °F
100
To Next Page
Loading...
Need help?
General
