Transmission of analog audio signal to external
stereo amplifier (or TV set)
Transmission of analog 7.1 audio signal to an
external amplifier(reciever)
Connections
17
An analog 2RCA-2RCA cable shall be used (not included).
Connect audio output AUDIO L R of your play-
er with audio input of your stereo amplifier
Select relevant input using INPUT SELEC-
TOR switch.
We recommend you to turn down the
volume of your audio equipment before
connection, in order to avoid lesion of
your hearing ability and eliminate risk of
damage of your audio systems.
You may send an analog audio signal from
your player to the TV set, if you use DVI,
Component Video, S-Video or CVBS for
video signal transmission and don’t use
AV received for digital audio decoding. In
case of connection using HDMI, video and audio signals will be transmitted using
a single HDMI cable, that’s why there is no need of additional analog audio con-
nections in this case.
We recommend you to turn down the volume of your audio equipment before con-
nection, in order to avoid lesion of your hearing ability and eliminate risk of dam-
age of your audio systems.
1
2
AUDIO IN
R L
An analog 2RCA-2RCA cable shall be used (not included). It is better to use
four identikal pairs.
We recommend you to turn down the volume of your audio equipment before con-
nection, in order to avoid lesion of your hearing ability and eliminate risk of dam-
age of your audio systems.
Chapter 4
To Next Page
Loading...
