Video
In this section you will find settings of video output type (digital HDMI or
analog) and adjusting of video resolution on selected output.
Resolution value adjusted will be used by default for any file played with the media
player.
Read carefully your TV or projection set instructions. Some video modes may not be
supported by your equipment.
In case of using of HDMI connection, depending on HDMI support in your TV/
projection set, intermediate HDMI equipment (if any) and the player, some video
modes may not be available or may function improperly. In this case, use other
video modes or other connection type.
To have the best picture quality it is advisable to use an HDMI connection. Ref.
Connection to a TV set with HDMI input.
System setup
21
Chapter 5
To Next Page
Loading...
