System setup
23
Chapter 5
HDMI audio: turn on and off transmition of audio signal via HDMI
Blu-Ray audio
When set to «Best quality» and «Digital audio output mode» set to «bitstream», the primary
audiotrack is sent to S/PDIF and HDMI as bitstream not depending on the presence of
secondary audiotrack; secondary audio/video functions («PiP») are disabled.
When set to «PiP support», secondary audio/video functions are enabled, and, to support
these functions, the player is allowed to use «decode» mode instead of «bitstream» mode
on digital audio outputs (so audio quality may suffer, e.g. stereo-PCM may be sent to S/
PDIF output, and S/PDIF, and multichannel-PCM may be sent to a HDMI output).
To Next Page
Loading...
