●
To change network folder settings: select the network folder in the file browser. Execute
the “Change the network folder” command using the contextual menu. In pop-up dia-
logbox modify network folder parameters. Press OK.
●
To delete the network folder: select the network folder in file browser. Execute the “De-
lete the network folder” command using the contextual menu.
TROUBLE: no access to internal hard disk of the player through the network
SOLUTION: several reasons and solutions of this problem are possible
Incorrectly adjusted or disabled network connection between the player and the client PC.
● Make sure that the player and the client PC are correctly connected to the network
(check the network cable connection).
● Make sure that the network parameters of the player are correct (Cf.: Setup menu,
“Network setting” section).
● Enter the player setup menu, System information section, and make sure that the
IP-address in the IP-address line is correct, and to the right of the IP-address “On”
is indicated.
● If you connect to a Windows PC, do the following: firstly, find the IP-address of
the player (cf. setup menu, “System information” section). Afterwards, on the PC:
press Start, Run and enter in the command line ‘ping IP-address-of-the-player’
(e.g.: ping 10.0.0.3). If successful transmission of packages is displayed, it shall
mean that the network connection between the player and the Windows PC is cor-
rect.
Incorrect IP-address of the player.
●
Make sure that you enter the IP-address currently assigned to the player. You may find
the IP-address currently assigned in the player Setup menu, “System information”
section.
Troubleshooting
49
Chapter 9
To Next Page
Loading...
