Duplo DC-616 Instruction Manual

2
43
PC Controller Setting
PC Controller Setting
5
REFERENCE
[center] appears while you are entering the crease
positions.
Click [center], the fi rst crease can be set in the center
of the distance between the fi rst cut and the second cut.
REFERENCE
Click [FUNCTION].
The fi rst cut
The second cut
The fi rst crease
position when
clicking [center].
Perforation
1. Enter the distance of the perforation position 1 from
the right edge of the document, and click [NEXT].
2. Enter the distance of the perforation position 2 from
the right edge of the document, and click [NEXT].
Move the perforation unit to the perforation position with
your hands.
The input here is only memorandum of the perforating
positions. For the details of changing the perforation tool
position and depth, refer to “Preparation Before Use” of
“Chapter 1 Before Using This Machine” in the “DC-616
Instruction Manual”.)

Duplo DC-616 Specifications

General

Brand	Duplo
Model	DC-616
Category	Paper Cutters
Language	English