Duplo DC-618 - Page 132

112
Daily Maintenance
Daily Maintenance
Clean the sensors at the exit with an
air blower
and
so on.
IMPORTANT
Air blower
Ejection
side
Document
feed side
Top cover
Reinstall the modules removed in step 2 to their
original positions.
Tighten the two
fi xing screws
on each of the
modules.
Reinstall the
margin slitter module
, the
center
slitter module 1
, and the
center slitter module
2
so that the color of the sticker on each of them
matches that of the sticker on each of the slots.
Close the
top cover
.