Duplo DC-618 User Manual

22
Before Using This Machine
2. Position
Document feed direction: A whole barcode is required to be within 3.0 to 20.0 mm from the
lead edge of the document.
Document width direction: A whole barcode is required to be within 25.0 to 60.0 mm from the
side edge of the document.
REFERENCE
Use a barcode generator function equipped on your software application or use barcode
generator software.
A Barcode may not be read even it is within the specifi cations depending on the print quality
of printer and document type.
If this is the case, enlarging the barcode may enable it to be read.
Number of barcode digits
2
50
21
34
*
● When there is no check digit:
1
. Start character *
2
. Data of hundreds digit of a JOB number
(If the JOB number is 250, the data is 2.)
3
. Data of tens digit of a JOB number
(If the JOB number is 250, the data is 5.)
4
. Data of ones digit of a JOB number
(If the JOB number is 250, the data is 0.)
5
. Stop character *
2
1
34
*
● When there is check digit:
1
. Start character *
2
. Data of hundreds digit of a JOB number
(If the JOB number is 250, the data is 2.)
3
. Data of tens digit of a JOB number
(If the JOB number is 250, the data is 5.)
4
. Data of ones digit of a JOB number
(If the JOB number is 250, the data is 0.)
5
. Check digit
(If the JOB number is 250, the data is 7.)
6
. Stop character *
When the JOB number is
250
2
50
When the JOB number is
250
Barcode format for 3-digit JOB number
5
*
5
7
6
*
For customers who replace the conventional DC machine with the DC-618, a 2-digit
barcode can be read.
Contact the dealer for more information.
IMPORTANT
●

Duplo DC-618 Specifications

General

Brand	Duplo
Model	DC-618
Category	Cutter
Language	English