59
2
Processing Documents by Retrieving a Saved JOB
3
Basic Operations
5. Touch the icon.
2.
Slit
Slit positions programmed are displayed.
3.
Cut
Cut positions programmed are displayed.
Touching the icon displays positions of cut 16 to
cut 30.
4.
Crease
Crease positions programmed are displayed.
Touching the icon displays positions of crease
16 to crease 20.
6.
Settings
Details of the settings for the JOB selected are
displayed.
Air Knife
Suction Power
Blow Fan
REG Mark
● Touching a
JOB name
and then the
details
icon displays the details of the JOB.
1.
Info
Name
: JOB name
Category
: A category in which the JOB is
programmed
Document Size
: Document size programmed
REG Mark
(Registration mark): A position of a
lead
mark
and a
side
mark
To Next Page
Loading...
Need help?
General
