60
Processing Documents by Retrieving a Saved JOB
Touching the icon displays the followings items
on the next page.
Apply Shrinkage
Adjust All
Last Cut Adj.
7.
Modules
The module programmed for slot 2 is displayed.
Touching the icon displays the following item on
the next page.
Speed
Touching the icon displays the module
programmed for slot 3.
The details of
Apply Shrinkage
,
Adjust All
, and/
or
Last Cut Adj.
are displayed only when any of
them are programmed in the JOB with Adjust.
(→ p.70)
Touching the icon displays the following items
on the next page.
Slitter Guide
Crease Depth
Cut Trim Setting
Trail Cut Mode
Cutter Speed
To Next Page
Loading...
Need help?
General
