58
Chapter3AdvancedOperation
Copyright © 2019 Duplo Corporation All Rights Reserved
5-3. B7, A7, A6 size paper (For EU)
B7,A7,A6sizepaper(fedbyshortedgefeeding)canbefoldedinthefollowingconditions.
However,B7,A7,orA6paperisregardedasnon-standardpaper,andthepaperlengthshouldberegistered,
referringto“2.StandardFoldingofNon-StandardPaper”(p.46).
• Thepaperfeeddirectionisonlyintheverticaldirection.
• Foldingmodesthatcanbeselected:
B7:Singlefold,Gatefold
A7:Singlefold
A6:Singlefold,Letterfold,Accordion-fold,Gatefold
The keys of folding modes that cannot be selected are grayed and cannot be operated.
• Foldingstyleislimiteddependingonthepaperqualityorpapersize.
Chapter 7 “1. Specifications” (p.93)
If small and light paper is used, too fast processing speed will result in stream-feed (continuous
feed). Decrease the processing speed as slow as possible.
Whenmis-feedordouble-feedoccurseventhoughthefeedingpressureandseparatingpressureare
settothesetvalue,adjustthefeedingpressureandseparatingpressure.
Chapter 2 “3. Standard Folding of Standard Paper” (p.36)
6. Stacker Roller
6-1. Changing stacker roller height
Somethickandstipapermaynotbeejectedsmoothlybecausethepapermayopenafterfolding.
Changethestackerrollerheightandwidenthespaceforthepapertopassinejection.
1
Remove the auxiliary paper ejection guide and paper support guide.
[A]
2
Lift the stacker roller and hold it with
hand to move to the [A] position shown
in the figure.
After completing folding operations, be
sure to return the stacker roller to the
standard position. Leaving it in the raised
state will result in poor alignment of
ejected paper.