Duplo DF-990 User Manual

79
Chapter4UsingtheDFHANDFEEDKIT
Copyright © 2019 Duplo Corporation All Rights Reserved
6
Insert a sheet of paper to perform test
folding.
Insert paper into the inlet, and the machine
will start feeding operation automatically to
process folding.
Compress the paper inside the machine to
insert paper into the inlet. If the paper is
not compressed enough, paper jam may
occur. If so, press the key to eject
paper forcibly.
7
Check the finish of test folding.
Adjustthefoldingmisalignmentasrequired.
8
Select the method of using the counter. (Count Up and Count Down)
Chapter 2 “3. Standard Folding of Standard Paper” (p.36)
9
Insert paper to start folding operation.
• Donotinsertthenextpaperbeforethemachinestops.Ifthenextpaperisinsertedbefore
the machine stops, [Jam Feed Sec] is displayed on the LCD touch panel, and the machine
stops.
When an error is displayed, press the key to force ejection.
• Whenremovingpaperfromtheinletafterthemachinestartspaperfeedingoperation,itis
determined that paper is fed inside the machine, [Jam Conveyance Sec] is displayed on the
LCD touch panel, and the machine stops.
If so, cancel the error by taking either of the following measures. Press the key to force
ejection.
5. Correcting Folding Misalignment
Do not put ngers inside during operation.
Keep away long hair, ties, jewelry and loose clothing.
It could cause injury.
5-1. Adjustment folding misalignment in up and down direction
Chapter 3 “1-2. Adjustment folding misalignment in up and down direction” (p.43)

Duplo DF-990 Specifications

General

Brand	Duplo
Model	DF-990
Category	Folding Machines
Language	English