21
6. Basics of Operation
The pool is operated from the remote control. Settings are altered via the operator's panel.
If the remote control has been misplaced or the batteries are empty then basic func-
tions can also be switched on or off from the operator's panel.
NOTICE
Damage to pool from water additives.
> Do not use any bathing bubbles, oils or exfoliating products.
6.1 Buttons and their functions
Remote control
• Press the respective button to switch on a function.
The button will briefly light up in blue.
• To switch off a function, keep the required button pressed for two seconds.
If there is another remote control in radio range, the house symbol will appear on
the operator's display panel. If you move outside the radio range, all the remote
control buttons will light up briefly.
Control panel
• Deactivate all functions using the
“Off” button.
• To access the menu, press the
“OK” button.
• Move between menu items with the
“up” and “down” buttons.
A menu item is marked when a square to its right blinks.
• In order to select the marked menu item, press the
“OK” button.
• To access the ECO menu, press the
“ECO” button.
7. Operation
7.1 Emotion circuit
To switch on, change the steam setting or to switch off
> Press the
“Emotion” button.
To Next Page
Loading...