EasyManua.ls Logo

DURAVIT Pool - Troubleshooting Common Issues

DURAVIT Pool
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44
Water change active appears on the operator's panel.
> Wait for 3 minutes until the hygiene and temperaturecircuit starts automatically.
The
Hygiene button lights up.
> Open the air bleed valve (4) until water escapes then close it immediately.
> Check your normal temperature and let the pool warm up.
12. Disposal
Dispose of the packaging in an environmentally-friendly manner.
The pool must be disposed of in an orderly, environmentally-friendly manner accord-
ing to the standard regulations that apply in your local area. Electronic components
must be recycled. Please consult the recycling point in your area.
13. Troubleshooting Support
DANGER
If a problem cannot be solved quickly then the water temperature
or quality can no longer be guaranteed.
> Take the pool out of use.
> Make the pool winter proof (see the chapter
Shutting down the pool)
CAUTION
> The pool may be repaired only by qualified plumbers and electricians.
Problem
Potential cause Solution
See
page
Button “ECO” illuminates. ECO or Standby-mode is
activated.
30
Button “ECO” flashes. ECO timer is active. 30

Table of Contents