GB
1. General notes
The service instructions on hand describe the adjustment of the
special sewing machine 367.
ATTENTION !
The operations described in the service instructions must only be
executed by qualified staff or correspondingly instructed persons
respectively!
Caution: Danger of injury !
In case of repair, alteration or maintenance work s witch off main switch
and disconnect the machine from the pneumatic supply system.
Carry out adjusting operations and functional tests of the running
machine only under observation of all safety measures and with utmost
caution.
The instruction manual on hand describes the adjustment of the
sewing machine in an appropriate sequence. Please observe in this
connection that various setting positions are interdependent. Therefore
it is absolutely necessary to do the adjustment following the described
order.
For all setting operations of parts involved in the stitch formation a new
needle without damage has to be inserted.
Machine covers having to be screwed off and on again for checking
and adjusting operations are not mentioned in the text.
Hint:
Some of the shafts of the special s ewing machine 367 are provided
with flat spots. This facilitates the adjustment considerably.
In case of all adjustments on flat spots the first screw in rotation
direction is put on such a flat spot.
1.1 Gauges
The locking peg 1 required for adjusting the machine belongs to the
standard accessories. It is located at the bottom side of the oil pan.
–
Tilt machine head to the back.
–
Take the locking peg 1 out of the fixture.
–
Tilt machine head back.
3
1
To Next Page
Loading...
