2. Technical data
Machine head: Class 559
Type of sew ing stitch: Double-chainstitch
Number of needles: 1
Needle system: 558 / 579
Attention!
When changing over from one needle system to the other the distance
between looper and needle and the adjustment of the needle
protection have to be checked in any case (see service instructions).
Max. needle size: Nm 80-120 (558) / Nm 90-125 (579)
Needle thread size: max. Nm 50
Looper thread size: max. Nm 30
Max. Speed: 2200 min
-1
Stitch distance: 0,5-2mm
Max. sew ing length: 50 mm
(depending on the sewing equipment)
Max. cutting length: 50 mm
(depending on the sewing equipment)
Operating pressure: 6 bar ± 0,5 bar
Air consumption: approx. 3 NL per working cycle
Rated load: 320 VA
Rated voltage: 1 x 190-240 V, 50/60 Hz
Dimensions: Machine head:
550 x 370 x 580 (L x B x H)
Table top (standard installation):
1060 x 750 x 1150 mm (L x W x H)
Table top (narrow stand):
620 x 850 x 1150 mm (L x W x H)
Working height: 730-900 mm (upper edge of the table top)
upper edge of the machine table:
830-1000 mm
Weight w ith stand: approx. 160 kg
Weight of head: approx. 100 kg
Weight of control: approx. 12 kg
Rated noise value: Lc = 77 dB (A)
Workplace-related emission value in accordance w ith DIN 45635-48-B-1
(sewing cycle 4,2 s ON and 1,0 s OFF)
Stitch distance: 1,2 mm
Speed: 2200 rpm
Buttonhole length: 24 mm
Material: double denim 509g/m
2
8
To Next Page
Loading...
Need help?
General
