10.3.3 Adjusting the thread tension in the main level
In the right field of the display the first two digits indicate the needle
thread tension when sewing. This can be adjusted directly from the
main level.
“F”-key Press the “F”-key. A value is blinking in the display.
Keys ïð Select the first two digits of the right field of the display
with the keys ïð . The value of the needle thread
tension is blinking.
Keys ñò Adjust the desired value with the keys òñ .
“ESC”-key Press the “ESC”-key for c ancelling alterations.
“OK”-key Press the “OK”-key for confirmation.
10.3.4 Adjusting the cutting length in the main level
In the right field of the display the last two digits indicate the cutting
length. This can be adjusted directly from the main level.
“F”-key Press the “F”-key. A value is blinking in the display.
Keys ïð Select the last two digits of the right field with the
keys ïð . The value of the cutting length is blinking.
Keys ñò Adjust the desired value with the keys òñ .
“ESC”-key Press the “ESC”-key for c ancelling alterations.
“OK”-key Press the “OK”-key for confirmation.
10.3.5 The counter
You can have the daily count number of pieces indicated or set it back
to 0 manually. If the daily number of pieces exceeds the maximum
value of 9999, it is set back automatically and starts counting with 0
again.
2x“F”-key Press the “ F”-key in order to edit the values of the main
level. Press the “F”-key anew and the display changes
over from the buttonhole program to the counter of the
daily number of pieces.
“ESC”-key Press the “ESC”-key for quitting the counter of the daily
number of pieces. The main level is indicated again.
Setting the counter of the daily number of pieces back:
“OK”-key When the daily number of pieces is indicated, hold the
“OK”-key pressed for several seconds.
The counter is set to 0 and the display changes over to
the main level again.
22
To Next Page
Loading...
Need help?
General
