13. Maintenance
Caution: Danger of injury !
Carry out maintenance work only when the machine is switched off.
In case maintenance work has to be done when the machine is
running, practise utmost caution.
13.1 Cleaning
A clean sewing automat avoids disturbances !
Daily cleaning:
–
Clean the zone around looper, thread trimmer and throat plate as
well as the sewing head daily from sewing dust, thread tails and
cutting waste.
If a vacuum cleaner is available, vacuum up the w aste.
–
Empty the waste container, if required.
–
Check the water level in the pressure regulator daily.
The water level must not rise up to the filter insert 2.
Let the water run out of the water separator 1 under pressure after
screwing in the drain screw 3.
32
1
2
3
To Next Page
Loading...
Need help?
General
