DURKOPP ADLER 745-34 - Page 30

+ Adjusting the left-corner-blade incision at the seam
start
Changing this value carries out the fine adjustment
of the left-corner-blade incision at the seam start.
Entry: - 20.0 ... + 20.0 0 = no adjustment
+ = corner-blade position
sooner
- = corner-blade position
later
+ Adjusting the right-corner-blade incision at the seam
start
Changing this value carries out the fine adjustment
of the right-corner-blade incision at the seam start.
Entry: - 20.0 ... + 20.0 0 = no adjustment
+ = corner-blade position
sooner
- = corner-blade position
later
+ Adjusting the left-corner-blade incision at the seam
end
Changing this value carries out the fine adjustment
of the left-corner-blade incision at the seam end.
Entry: - 20.0 ... + 20.0 0 = no adjustment
+ = corner-blade position
sooner
- = corner-blade position
later
+ Adjusting the right-corner-blade incision at the seam
end
Changing this value carries out the fine adjustment
of the right-corner-blade incision at the seam end.
Entry: - 20.0 ... + 20.0 0 = no adjustment
+ = corner-blade position
sooner
- = corner-blade position
later
28