Tape feed
Switching the tape feed on/off
Entry: on/off
Seam-start tape-length
Entry: 00.0 ... 99.9 mm
Seam-end tape-length
Entry: 00.0 ... 99.9 mm
Flap sequence
No flap clamps
Close left flap clamp first, then right
Close right flap clamp first, then left
Close both flap clamps simultaneously
Only right flap clamp present
Only left flap clamp present
Switching the holder on/off
Entry: on/off
Switching the vacuum on/off
Entry: on/off
Smoother
Switching the smoother on/off
Entry: on/off
Smoother time
Entry: 010 ... 1000 [strokes]
1 stroke = 0.001 s
Smoother velocity
Entry: 1 ... 15
1 = minimum
15 = maximum
29
To Next Page
Loading...
