without Tape Feed
Tape feeding switched off
Tape Feed with Step Motor
Equipment: electromotor driven tape feeder
Electro-pneumatic Tape Feeding
Equipment: electro-pneumatic driven tape feeder
Switching the vacuum system on/off
This parameter tells the controller whether the machine is fitted with a
vacuum system.
The vacuum system is switched on and off in the pocket-program menu
item (F1) on the main screen.
Entry: on/off
Switching the holder on/off
This parameter tells the controller whether the machine is fitted with a
holder.
The holder is switched on and off in the pocket-program menu item
(F1) on the main screen.
Entry: on/off
Switching the stacker/blower pipe on/off
This parameter tells the controller whether the machine is fitted with a
stacker/ blower pipe.
The stacker/ blower pipe is switched on and off in the pocket-program
menu item (F1) on the main screen.
Entry: on/off
45
To Next Page
Loading...
