Switch waistband clamp on/off
This parameter signalizes the control whether the sewing unit is
equipped with a waistband clamp or not.
Pocket bag over flap mode
Any change concerning the pocket bag over flap mode should be done
here i.e. in which position the raised feed clamp goes for the inserting
position.
Info line:
Pocket bag over flap
Switch piping cutter on/off
This parameter signals the control whether the sewing unit is equipped
with a piping incision device.
Entry:
on/off
pneumatic piping knife
left piping cutter, with motor
right piping cutter, with motor
46
To Next Page
Loading...
