DURKOPP ADLER 767 Service Manual

17.3 Master reset
A master reset resets all parameter values to their factory settings.
–
Turn off the main switch.
–
Press the “P” key and turn on the main switch.
–
Release the “ P”key..
–
Enter code no. “1907”.
–
Press the “E” key. The parameter F-100 is displayed.
–
Press the “E” key. The value of the parameter F-100 is displayed.
–
Set the value to 170.
–
Press the “P” key twice.
–
Turn off the main switch.
–
After a brief waiting period turn the main switch back on.
All parameters have now been restored to their pre-set values.
Caution !
A few parameters, like F-111, F-161, F-170, F-171 and F-190
to F-194 for example, are not affected by a master reset.
All machine-specific parameters must be reset again in
accordance with the parameter sheet.
77
GB

DURKOPP ADLER 767 Specifications

General

Brand	DURKOPP ADLER
Model	767
Category	Sewing Machine
Language	English