15.3 Setting the thread trimming stitch for the short thread trimmer
Standard checking
The length of the last stitch before thread trimming can be set. Thus,
the length of the cut needle and hook thread is influenced. These two
threads should preferably be equally long.
The last stitch of the short thread trimmer should be approx. 1 - 1.5 mm.
Correction
With the screw 1 the length of the thread trimming stitch is influenced.
When turning the screw in clockwise direction the stitch length will
become longer.
When turning the screw counter-clockwise the stitch length will become
shorter.
69
GB
1
To Next Page
Loading...
