DURKOPP ADLER 767 Service Manual

19.17 SP 470 Roller feed device
The removal of the material by the upper and lower conveyor rollers
after sewing ensures a smooth and uniform product.
(See Additional Instructions 0791 767681).
19.18 WTA 13-2 Automatic lowering
This is an optional item to go with the upper and lower conveyor rollers.
It enables the stitches to be adjusted from the beginning of the seam to
the automatic lowering of the upper roller. This ensures that the roller is
not lowered until the material is beneath it.
(See Additional Instructions 0791 767681).
19.19 FSE 13-1/2 Skip Stitch Detection
The classes 767-FAS-373-RAP-HP; 767-FAS-573-RAP-HP;
767-KFA-373-RAP-HP equipped with the sewing drive
DC1600/DA82GA (since 01/01/1999) can be retrofitted with the
Skip Stitch Detection FSE 13-1 (Part-No. 0767 590264) or the
FSE 13-2 (Part-No. 0767 590274).
(See Fitting Instructions 0791 767707).
94

DURKOPP ADLER 767 Specifications

General

Brand	DURKOPP ADLER
Model	767
Category	Sewing Machine
Language	English