To Next Page

To Previous Page

6.6 Winding on the hook thread

–

Put the thread reel on the thread stand and conduct t he needle

thread through the unwinder arm.

–

Conduct the thread through the thread guide 5, around the

tensioner 4 and through the thread guide 3.

–

Place the thread behind the blade 6 and sever it.

–

Fit the bobbin 1 onto the bobbin winder.

Hint

There is no need to wind the thread onto the bobbin by hand.

–

Press the bobbin-winder lever 2 into the bobbin.

–

Sewing

The bobbin-winder lever terminates the process as soon as the

bobbin is full.

The bobbin winder always stops in such a position that the blade 6

is in the insertion position (see right-hand illustration).

–

Remove the full bobbin 1, place the thread behind the blade 6 and

sever it.

–

Fit empty bobbin onto the bobbin winder for the next winding

process and press the bobbin-winder lever 2 into the bobbin.

CAUTION !

If the thread is not to be wound on during sewing, it is essential

for the sewing foot to be locked in the raised position and the

sewing-foot stroke set to the smallest value.

54 3 2 1

Keystone Sewing Machine Company, Inc.

DURKOPP ADLER 867 Instruction Manual

Other manuals for DURKOPP ADLER 867