Sewing an intermediate bartack - Push down the stitch regulator lever 6.
The machine sews reverse stitches as long as the stitch
regulator lever is pressed down.
The rotation speed is determined through the pedal
or
- Actuate key 5.
Sewing over a cross seam.
(max. sewing foot stroke)
The max. sewing foot stroke is switched on.
The rotation speed is limited to 1600 min
-1
.
Operation modes of the max. sewing foot stroke:
- Press briefly the knee switch to switch on the max.
sewing foot stroke.
- Actuate the knee s witch again to switch off the max.
sewing foot stroke.
Sewing the 2
nd
stitch length during
the sewing process
(max. stitch length)
- Actuate key 2.
Increase the thread tension during
the sewing process
- Actuate key 1.
At the seam end
Remove the material
- Push the pedal all the way back and keep it pushed.
The final bartack will be sewn (if activated).
The thread will be trimmed.
The machine halts in the 2
nd
position.
The needles are lifted (Turning back).
The sewing feet are lifted.
- Remove the material.
64
Keystone Sewing Machine Company, Inc.
To Next Page
Loading...
Need help?
General
