3.3 Setting the working height
–
The stand height is adjustable between 750 and 900 mm.
–
Loosen the screws (1).
–
Set the required table top height and make sure that it is identical
on both sides. To do that, use the scale on the s tand feet. Set the
stand height so that it corresponds with the operator ’s body
proportions.
–
Tighten the screws (1).
Caution! Risk of injury!
Failure to adjust the stand height to the operator ’s body proportions
can cause damage to the operator ’s locomotion system.
9
EN
1
To Next Page
Loading...
