2.9 Throat plate
Rule:
With the standard setting of single neddle machine the throat plate
insert should be adjusted to the center of the throat plate.
–
Remove the throat plate.
–
Loosen the screws (2) and adjust the throat plate insert (3) to be in
the centre of the throat plate cutout.
–
Fasten the screws (2) again.
–
Fit the throat plate again.
Caution: Risk of injury!
Turnthemainswitchoff.
Only carry out this adjustment when the machine is turned off.
ATTENTION: Danger of breakage!
An incorrectly fixed throat plate causes the destruction of the parts
when the machine is started.
16
22
3
To Next Page
Loading...
