Components and functions
Instructions for use DAC basic/classic - DAC eco plus - OP4X00 - 00.0 - 04/202418
4.4 Proper use
The control DAC basic/classic - DAC eco plus - OP4X00 is
not
a standalone unit; instead, it is intended for installation in a
sewing machine (hereafter referred to as machine). For additional
information, refer to the Declaration of Conformity p. 7.
The control is intended for industrial use.
The control may only operate in rooms that are clean and dry.
Do not operate the control when aerosols (sprays) or oxygen are
in use.
Proper use includes compliance with the operating, maintenance,
and repair conditions as specified by the manufacturer.
Only authorized persons may work on the control ( p. 9).
Improper use can result in hardware damage!
Follow all instructions provided.
CAUTION
To Next Page
Loading...
