DURKOPP ADLER DAC basic User Manual

Control panel
Instructions for use DAC basic/classic - DAC eco plus - OP4X00 - 00.0 - 04/202426
5.3.2 Adjusting the end bartack
The end bartack secures the seam at the seam end. If a seam
consists of backward stitches only, it is called a single bartack.
A
seam made up of forward and backward stitches is called a
double bartack.
To adjust the single bartack:
1. perform a long press.
 The interface Start Backtacking settings opens.
2. Use and to adjust stitches A and B and
the number of repeats n.
• n = 1 for single bartack
• n = 2 for double bartack
• n > 2 for multi-bartack
3. Press to return to the main screen.
 The new values are adopted.
You can begin sewing; press the pedal forward to pedal
position +1. At the end of the seam, press the pedal back to
pedal
position -2.

DURKOPP ADLER DAC basic Specifications

General

Brand	DURKOPP ADLER
Model	DAC basic
Category	Controller
Language	English